2005-10 Chrysler 300 Armrest Reupholstery Kit - Version 3
This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather cover for your existing 2005-10 Chrysler 300 armrest. It does not include an armrest.
What's Included
- Included: 1 leather armrest cover, cut and sewn to order.
- Not included: armrest, adhesive, or hardware.
Before You Order
- Fits 2005-10 Chrysler 300.
- Please make sure your armrest looks as in pictures and if it does not, please contact us prior to ordering.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, contact adhesive or a stapler depending on the armrest
You'll remove the armrest or its lid, fit the new cover (stretched, glued or stapled depending on the design), and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (16 Steps)
Step 1. Lift up cover showing the VES screen.
Step 2. Locate and remove two Phillips head screws at the base of the cover.
Step 3. Once removed, this will allow you to remove the cover assembly. At this point you will see two more of the same screws head the release latch. Remove these as well.
Step 4. Now, firmly, but carefully, pry off the bottom black cover plate of the arm rest. Start in the corners and work your way from end to end and repeat as necessary as its a tight hold. It will release itself and will feel as if it broke. So long as you dont gorilla handle it, and work all the corners and sides evenly it will come out intact. *** Do not pull or remove any of the rubber feet on the bottom. They will not expose any screws or help the removal at all. They will not be able to be reattached if removed. ***.
Step 5. With the cover removed, you will see four more screws holding the other half of the hinge on the cover. Remove and set aside these screws. This leaves you with only the lid.
Step 6. Now, with a pair of needle nose pliers, staple remover, or thin pry bar, remove each of the staples on the underside.
Step 7. Now with only a cover with foam padding on it, wipe it down to remove any oils or chemicals on it.
Step 8. Align the stitching of your new cover on the indents made on the sides of the foam. This is a good indicator of the edges. It will not line up perfectly as the new piece is a little larger, but use it as a guide leaving an equal amount of material on either side of it. Ensure the piece is centered so the sides have enough material to wrap around. Also, if you choose an embroided design, make sure the design is positioned in the correct orientation.
Step 9. After a test fit, spray an adhesive that can bond the plastic foam to leather. 3m has a large selection of these. Just read the can first for suitable applications.
Step 10. After a couple of light coats, allow it to tack up and replace the new cover on the lid. You can reposition right after application so dont worry about misplacing itbut do it quickly!
Step 11. Allow the glue to bond and dry for an hour or so. *** You will need a very heavy duty, narrow crown staple for this task. Do not attempt with your average hobby staple gun. An air powered or electric gun works best. You can also use leather glue but will require more time to dry and will take more time to hold the leather in place while it tacks and bonds to the plastic. ***.
Step 12. Come back and stretch the sides underneath. If you have embroidery, do the long sides first to smooth out any wrinkles on the leather from the stitching.
Step 13. Ensure while stretching that you are not moving the leather off center. If you are, pull it up and apply more adhesive spray and wait more time.
Step 14. When you start to stretch the sides, put a new staple on the middle of each side and evenly staple more on alternating sides to ensure the fit is tight. Once its tight, staple as many times as you can on each side to make double sure it wont be coming off.
Step 15. The corners will possibly require you to trim off some of the material to get a staple in and the plastic cover back on.
Step 16. Once dry, stapled/glue tight and trimmed to your liking and requirements, reassemble in the reverse order described above and show off to your friends and fellow car enthusiasts! Installation of head rest covers.
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.