This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather e-brake boot for your 1999-05 Toyota Yaris. It replaces the factory boot and installs on your factory frame or trim. It is not a complete e-brake assembly.
What's Included
- Included: 1 leather e-brake boot, cut and sewn to order.
- Not included: e-brake handle, trim or hardware. You reuse your factory parts.
Before You Order
- Fits 1999-05 Toyota Yaris.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the e-brake trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (11 Steps)
Step 1. Remove your shift knob… righty tighty, lefty loosey. AUTOMATICS: Remove the shift knob using the screw on the base. Once the screw is removed the top part of the shifter will pull off. Once removed pull the base part off as well. Turn the key on and suppress the brakes to move the shift selector to D.
Step 2. Remove the carpet liner, it just lifts up, then loosen the screw (Phillips).
Step 3. Now lift up on the front, there are two plastic clips that hold this down. Don’t worry about snapping anything, they are very strong. WARNING! if you have interior lighting, and the switch is on your center console, be careful with removing it. Make sure your wires are disconnected before pulling too hard. AUTOMATICS: Remove the silver bezel around the gear select; starting with the front side separate the bezel from the center console, mild to moderate force is required. After the bezel is separated, install the shift boot into the bezel by manipulating the preformed base of the shift boot to fit into the specified area on the bezel (little hooks hold it into place). Once installed inspect the top side (visible area) to make sure the boot is seated smoothly around shift bezel.
Step 4. Pull off your stock boot, through the bottom (it is held on by a friction retainer wire, and little clips.) Remove your chrome boot top, it is held on by a slip ring.
Step 5. Here is the new boot. Turn inside out and reinstall the chrome topper.
Step 6. Installing it upside-down also looks good. Install back onto lever same way as you took it off, just reverse. AUTOMATICS: Reinstall the shift bezel with the new boot installed slipping the boot over the gear select knob. With the shift boot and bezel re-installed proceed to reinstall the gear select knob.
Step 7. Start by applying double sided sticky tape along the bottom edge of the boot, where you are going to install it onto your plastic.
Step 8. From underneath the console tape the edge of the boot to the plastic, and then reinstall console again.
Step 9. Carefully push the e-brake handle and the shift lever through the leather, it snags on the leather pretty easily, and you don’t want to stretch or rip the boot!
Step 10. Screw down center console, clip the front, and screw on the shift knob.
Step 11. Enjoy!:).
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.