1998-04 Isuzu Amigo Shift Boot - 4X4

This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.

What This Is

A custom-sewn leather shift boot for your 1998-04 Isuzu Amigo. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.

What's Included

• Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
• Not included: shift knob, trim, frames or hardware. You reuse your factory parts.

Before You Order

• Fits 1998-04 Isuzu Amigo.
• It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
• International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.

Installation

Difficulty: Moderate  |  Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame

You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.

▼ Click to Open / Close Step-by-Step Installation Guide (14 Steps)

Step 1. Remove old shift boot by unscrewing the plastic trim that surrounds the boot. Unscrew the frame that the old boot is stapled to. Unstaple the old boot from the frame.

Step 2. Carefully stretch the new boot over the frame.

Step 3. Hint -start with the sewn corner.

Step 4. Staple the new boot on the frame.

Step 5. If you don't have access to a stapler, glue can be used instead.

Step 6. Make sure it's aligned with the tabs mounting the frame to the console.

Step 7. Look it over carefully to make sure everything is flush and flat, no wrinkles.

Step 8. Reassembly is the opposite of assembly.

Step 9. Remove armrest from center console by loosening the two screws at the hinge. Unscrew the bottom cover of the armrest (2 screws). Remove staples holding old cover to armrest and remove old cover.

Step 10. Slide one end of the new cover over the back of the armrest (The armrest is wider at the front; the narrower end goes over the back).

Step 11. Stretch the new cover over the armrest.

Step 12. Smooth out the cover by stretching as needed.

Step 13. Staple the new cover just like the old one was.

Step 14. Re-install in reverse order of removal.

Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.

Options & Pricing

Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.

Material

• Regular Leather
• Perforated Leather
• Faux Alcantara
• Carbon Fiber Vinyl

Two-tone: choose a second color in the options above.

Layout

• Default (Like My Factory Boot)
• 4 Panel (Stitching Forms An X) +$9
• Front to Back (Axis Of Car) +$9

Style

• Quadruple Thread +$9

Quadruple stitching color applies to the outer lines of thread.