This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather shift boot for your 1994-98 Geo Tracker. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.
What's Included
- Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
- Not included: shift knob, trim, frames or hardware. You reuse your factory parts.
Before You Order
- Fits 1994-98 Geo Tracker.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (15 Steps)
Step 1. Remove the 5-speed shifter knob from the shaft by unscrewing the knob (counterclockwise). Pull off the rubber accordion 5-speed shifter boot (if possible). TIP: Shifting the 5-speed to neutral will make these steps easier.
Step 2. Remove the 4WD knob by removing the set screw (on the rear of the knob). Remove the 4WD shifter boot (if possible). TIP: Shifting the 4WD to neutral or 2L will make these steps easier.
Step 3. Remove the pictured screw (one on each side) from the shifter console.
Step 4. Remove the console. If you could not remove the boots in Step 1 & Step 2, do so now. TIP: Notice that while there are no screws on the rear of the console to remove, there is a tab which fits under the drink holder console.
Step 5. Remove the (4) screws from the boot base plate. You will likely have to cut the carpet & pad away to access all four screws.
Step 6. Cut away the lower-middle portion of the intermediate boot. Be careful not to cut or damage the lower/inner boot (the boot which protects the transmission).
Step 7. Remove the (8) screws from the boot base plate. You will likely have to cut the carpet & pad away to access all four screws.
Step 8. Insert the screws from the base plate (4WD) into the new respective boot. The screw holes in the new boot will look too small, but they’re meant to be that way. Don’t be afraid to use force to push the screws through the holes. It will not damage the boot.
Step 9. Screw the screws back into their respective holes. You may have to stretch out the leather a bit to get the screws into their holes. Don’t be afraid to use some force – the leather is very strong.
Step 10. Attach the 5-speed boot to the 5-speed shifter knob by reversing the boot (inside out), and fastening the boot to the knob with a hose clamp (as pictured). After fastening the boot with the clamp, reverse the boot right-side-out again. NO LIFT KIT:
Step 11. Screw the new shift boot same as you just did with the RWD one in step.
Step 12. LIFT KIT:
Step 13. Affix the “Sticky-Back” Velcro strip to the shifter console collars as shown.
Step 14. Reinstall the center console by reversing the steps undertaken to remove it. LIFT KIT ONLY - Attach the 5-speed shifter boot Velcro to the matching console Velcro.
Step 15. Reinstall both shift knobs (on the 5-spd and the RWD stick).
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Nappa Leather +$15
- Genuine Alcantara +$25
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Layout
- Default (Like My Factory Boot)
- 4 Panel (Stitching Forms An X) +$9
- Front to Back (Axis Of Car) +$9
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.