This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather e-brake boot for your 1992-98 Honda CRX Delsol. It replaces the factory boot and installs on your factory frame or trim. It is not a complete e-brake assembly.
What's Included
- Included: 1 leather e-brake boot, cut and sewn to order.
- Not included: e-brake handle, trim or hardware. You reuse your factory parts.
Before You Order
- Fits 1992-98 Honda CRX Delsol.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the e-brake trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (7 Steps)
Step 1. The center console consists of two parts. The front section has the shift boot trim piece and the rear section has the armrest. Remove the screws that hold the rear section of the center console into place. There are 2 on each side front and rear and one inside the center console. Start at the rear.
Step 2. Proceed to the front and remove the two screws under the dash.
Step 3. Remove the rear console section and slide it back (to completely remove it, you would need to unplug the cigarette lighter cable):
Step 4. Unscrew the shift knob. It may be very tight, so if you cannot do it by hand, use vise-grips for extra leverage. Make sure to wrap the shift knob with a cloth or a towel to prevent from scratching it. Then remove the two screws holding the front section of the console:
Step 5. To completely remove the front section, gentle pry it rearward to free the two clips holding it to the upper dash above the stereo opening. Because it is blocked by the e-brake, you will need to lift the section upward while spreading the "wing" sides (where the screw holes are) and rotating it at the point of contact with the e-brake. After it's removed, turn over the front center console section for removal of the shift boot collar - there are two screws that hold it into place:
Step 6. Unwrap the metal frame from the shift boot (take note of how it is originally attached) and turn it inside out and remove the rubber band to free the plastic plug-like ring. Turn the new boot inside out and slide the plug-like piece (smooth end first) into the boot starting from the wider end. After it's been worked in all the way (and this will require some effort) use a ZIP-tie to fasten it to the boot. Then turn the boot back to right side out. Now wrap the boot around the metal frame just like the factory boot was positioned, and mount the frame back to the console piece with the two screws (refer back to the photo above).
Step 7. Remove the original e-brake boot and replace it with the new boot (this is by far the easiest step). Reinstall the front console (being careful to ensure the two clips are properly positioned), reinstall the rear console, reinstall the shift-knob and. enjoy!
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.