This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather e-brake boot for your 1986-92 Toyota Supra. It replaces the factory boot and installs on your factory frame or trim. It is not a complete e-brake assembly.
What's Included
- Included: 1 leather e-brake boot, cut and sewn to order.
- Not included: e-brake handle, trim or hardware. You reuse your factory parts.
Before You Order
- Fits 1986-92 Toyota Supra.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the e-brake trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (12 Steps)
Step 1. Give yourself space to work. Make sure to slide the seat all the way back and tilt the steering wheel up as far as it will go. Remove the ash tray from the holder. Pull the tray as far as it will go out, then press down on the little metal lever at the center to release it. Remove the four screws behind ashtray. You can leave the ashtray holder/brackets in place (easier) or remove them.
Step 2. Remove the shift knob with a swift and strong counterclockwise twist. If you have never removed it before it might require significant force to loosen.
Step 3. Remove screw from black trim panel located on the driver's side, near the emergency brake handle rest.
Step 4. The black trim panel around the ashtray and radio is connected to the dashboard with several snap in type fasteners. It is quite flexible and will come out with ease when you pull it. Use your fingers or a flat screwdriver wrapped with masking tape to pry it loose.
Step 5. There will be several wires still attached to the panel when it comes loose. Disconnect the cables from the rear of the hazard lights, cigarette lighter, and headlight washer switch (if your vehicle is equipped with it).
Step 6. Slide the black trim panel completely free of the dash and up over and off the shift stick.
Step 7. Flip it over and you will notice a metal plate holding down the shift boot. Remove the two screws from the plate. The bottom of boot is glued to the metal plate. Remove the boot and clean off the old glue from the bracket. Lightly clean up the bracket with 120-grit sandpaper.
Step 8. Turn the factory boot inside out and notice how there are slits in the top of the boot that are glued over the plastic ring. Lift the slits and remove the plastic ring.
Step 9. Cleaning the bracket is optional, but sanding off any rust keeps it away from the new leather boot.
Step 10. Flip the new boot inside out and place next to the factory boot. Using a very sharp knife, try to make slits in the top of the new boot to match the factory slits. Wrap the slits over the plastic ring. Make sure only the strips should be wrapped around the ring, like the old boot had it. Use super glue or a hot glue gun to glue the slits over the plastic ring. Let dry.
Step 11. Glue the bottom of boot to the metal plate like the factory boot was. Let dry.
Step 12. Reassembly is the reverse order of removal. As for the e-brake boot, slide the old one off the emergency brake handle. Slide on the new boot, line it up and attach the Velcro strip at rear of boot. That's all.
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.