This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather e-brake boot for your 1981-83 Delorean Dmc-12. It replaces the factory boot and installs on your factory frame or trim. It is not a complete e-brake assembly.
What's Included
- Included: 1 leather e-brake boot, cut and sewn to order.
- Not included: e-brake handle, trim or hardware. You reuse your factory parts.
Before You Order
- Fits 1981-83 Delorean Dmc-12.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the e-brake trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (6 Steps)
Step 1. Let's start with the e-brake boot this time. It's a 5-second job to install it - just pull it over the existing assembly.
Step 2. Remove the two screws on the console between the shifter and the window buttons. Remove the shift knob by turning counter-clockwise. Remove the shift boot by gently squeezing and lifting up and out. The framework is plastic (and 23 years old) so be gentle.
Step 3. Using low heat (like a hair dryer) to warm any glue, gently remove the staples and then the old vinyl boot. Repair or reinforce any breaks in your frame. If the frame is cracked or a tab is broken, strips of flat metal can be used to repair it. Glue on the flat side of the bracket.
Step 4. Insert frame/bracket into boot, pulling tight around the corners. Try to position the seams so that they'll lay flat, it'll make your job easier later. Make sure the double-stitches are on the outside of the frame, with the tabs facing out. Make sure, that the corner of the boot where the stitching is SHORTER faces AWAY from the driver and towards the front of the car.
Step 5. Start glueing the leather down. Keep it as low as possible, and out from under the locking tabs on the bracket/frame. Rather than gluing a whole side at once, work about an inch at a time, pressing with your fingers. Hot glue works well. It's probably not the best, but it is easily removed if you need to start over or someone comes up with a better frame. Clean up any glue globules that will interfere with a good fit on the console plate.
Step 6. Reinstall the plastic frame in the center console.
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.