1989-95 Ford Taurus Sho Shift Boot

This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.

What This Is

A custom-sewn leather shift boot for your 1989-95 Ford Taurus Sho. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.

What's Included

• Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
• Not included: shift knob, trim, frames or hardware. You reuse your factory parts.

Before You Order

• Fits 1989-95 Ford Taurus Sho.
• It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
• International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.

Installation

Difficulty: Moderate  |  Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame

You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.

▼ Click to Open / Close Step-by-Step Installation Guide (10 Steps)

Step 1. Take out the armrest cover by removing 3 screws holding it onto the centre console. This step isn’t necessary but will make removing the centre console easier. Remove the bolt (7mm) under the cup holder and shift knob by turning it counter-clockwise.

Step 2. Lift the centre console at the end, be careful not to break off the plastic tabs.

Step 3. Unplug the cigarette lighter socket and remove console.

Step 4. Take off the original shift boot by removing the 4 retaining clips; the plastic pegs will break off if too much force is applied so be careful. Then separate the metal bracket from boot; you will need to use it on the new boot.

Step 5. Test-fit the new shift boot to the metal bracket to ensure the holes in the boot line up with the holes in the bracket. You can apply some adhesive between the two but it is not mandatory. Reuse the rubber grommet from the old shift boot in the new one, this will ensure the boot fit nice and true against the shift knob.

Step 6. Reinstall the completed console and snap the tabs back together.

Step 7. Unscrew the 3 screws holding the armrest onto the centre console and remove.

Step 8. Remove the top plastic backing by unscrewing the four 7mm bolts.

Step 9. Remove hinge mechanism; then wrap the leather armrest cover over the armrest, making sure it fits tight and smoothly will create a nice and wrinkle free appearance. You may apply some adhesive to assist in that process, but it is not mandatory.

Step 10. Reinstall hinge, top plastic cover, and replace completed armrest onto centre console.

Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.

Options & Pricing

Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.

Material

• Regular Leather
• Perforated Leather
• Nappa Leather +$15
• Genuine Alcantara +$25
• Faux Alcantara
• Carbon Fiber Vinyl

Two-tone: choose a second color in the options above.

Layout

• Default (Like My Factory Boot)
• 4 Panel (Stitching Forms An X) +$9
• Front to Back (Axis Of Car) +$9

Style

• Quadruple Thread +$9

Quadruple stitching color applies to the outer lines of thread.