This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather e-brake boot for your 2000-07 Toyota MR2 Spyder. It replaces the factory boot and installs on your factory frame or trim. It is not a complete e-brake assembly.
What's Included
- Included: 1 leather e-brake boot, cut and sewn to order.
- Not included: e-brake handle, trim or hardware. You reuse your factory parts.
Before You Order
- Fits 2000-07 Toyota MR2 Spyder.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the e-brake trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (12 Steps)
Step 1. Get tools ready. A) Hot glue gun w/ one stick. B) Screwdriver.
Step 2. Remove 4 screws. There are 2 on each side. You might need to unbolt seat(s) to get to it. Also don’t forget to unscrew your shift knob (not shown). Start lifting it up.
Step 3. Unplug the harnesses for the power windows (red arrows) and remove the inner rubber piece. Some folks leave this in. You can tear it out.
Step 4. Make sure the boot facing the right way. Typically the double stitching faces the rear and the single stitching faces the front.
Step 5. Apply some glue between the plastic tab from console & leather from boot. If your boot is already trimmed this way, use it as a guide.
Step 6. As you can see, it would look something like when done. This helps with the fitting. Now snap this piece back in to console.
Step 7. After snapping the plastic back in place (red arrow), you can see that lot’s of gaps exist (yellow arrow).
Step 8. Now you need to start gluing inside.
Step 9. Start by gluing the other end first, then glued different points, from side to side.
Step 10. Always make sure to flip the console over after each 'set' of parallel glue points to make sure no gaps exist.
Step 11. Go around all the edges with a little extra glue for good measure. Mine aren’t. Better safe then sorry.
Step 12. Now you can put the console back and reverse your steps. a) Put console back on w/harnesses plugged b) Screw shift knob back on c) Put the 4 screws back in.
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.