This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather shift boot for your 1993-2002 Toyota Supra. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.
What's Included
- Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
- Not included: shift knob, trim, frames or hardware. You reuse your factory parts.
Before You Order
- Fits 1993-2002 Toyota Supra.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame
You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.
▼ Click to Open / Close Step-by-Step Installation Guide (11 Steps)
Step 1. Open the ashtray, and pull up on it to remove it from the 'shifter console piece.'.
Step 2. Gripping the area where the ashtray was, pull up on the rear of the 'shifter console piece' gently to unsnap the clips holding it down.
Step 3. Pull up on the front of the 'shifter console piece' gently to remove the piece. Undo the Velcro around the shifter neck, and slide the stock shifter boot up over the shifter knob. Undo the ashtray light wiring harness by pressing the clip and pulling them apart.
Step 4. Set the shifter console piece upside-down on a soft cloth on a stable work area, making sure not to scratch the flaky dash coating on 1993-96 Supras' dash pieces ('97-98 dashes don't scratch easily.).
Step 5. Use a drill, dremel tool, cut-off wheel, etc to separate the plastic rivets holding down the plastic ring holding the stock shifter boot down. NOTE: you should cut the rivet area a bit to loosen it, then simply pull up on the ring and it will SNAP/BREAK away from the rivets, leaving small rivet pegs sticking up.
Step 6. The old shift boot will simply fall out. Discard the plastic ring piece. Now, simply put the new boot back in like the old one was.
Step 7. Align the new shifter boot in the proper orientation so the holes in the boot slide over the rivet pegs. Test fit the boot now. NOTE: Depending on how many pegs are left sticking up, you may have to hold the boot in place while test fitting.
Step 8. Using 'Automotive GOOP' or another similar adhesive, apply a thin bead around the END of the shiter boot skirt for about 1/4 of the way around the perimeter of the OUTSIDE LEATHER, and press it onto the back of the shifter console piece. You will have to hold it in place for a couple minutes while the adhesive dries. NOTE: Be careful to avoid any excess adhesive showing on the visible part of the boot!
Step 9. Continue applying adhesive and sticking down the skirt around the rest of the perimeter until the boot is completely held down.
Step 10. Allow the adhesive to dry for 24 hours, and then scrape off any excess adhesive showing on the top side of the boot. Reverse steps 1-5 to reinstall the shifter console piece.
Step 11. To install the e-brake boot, simply slide it on the handle and use a piece of stick or a dull tool to push it below the rubber surround.
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Material
- Regular Leather
- Perforated Leather
- Nappa Leather +$15
- Genuine Alcantara +$25
- Faux Alcantara
- Carbon Fiber Vinyl
Two-tone: choose a second color in the options above.
Layout
- Default (Like My Factory Boot)
- 4 Panel (Stitching Forms An X) +$9
- Front to Back (Axis Of Car) +$9
Style
- Quadruple Thread +$9
Quadruple stitching color applies to the outer lines of thread.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.