1991-97 Toyota Landcruiser Shift Boot - Dual

This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.

What This Is

A custom-sewn leather shift boot for your 1991-97 Toyota Landcruiser. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.

What's Included

• Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
• Not included: shift knob, trim, frames or hardware. You reuse your factory parts.

Before You Order

• Fits 1991-97 Toyota Landcruiser.
• It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
• International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.

Installation

Difficulty: Moderate  |  Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame

You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.

▼ Click to Open / Close Step-by-Step Installation Guide (8 Steps)

Step 1. Remove Gear Knob (unscrew anticlockwise) from the transfer case.

Step 2. The easy way is to just unsnap the boot from the small tabs that are holding it using the pictures provided. BUT if you want to see what you are doing, remove the four screws (two on each side) with a Phillips head screwdriver. Move seats all the way to the rear to get at the rear screws.

Step 3. The console will lift up but you must disconnect the plug for the tranmission Power/2nd start buttons.

Step 4. Turn on ignition, foot on brake and move gear shift to D. Console will lift up but you will have to push gear shift button in and slide console over it being care full not to scrape too much.

Step 5. If you have purchased the new boot with a bracket just snap the new boot in lieu of the old one. If you didn't go for the bracket, you have to remove it from the old boot and feed it through the hem in the new boot.

Step 6. Re-install everything in reverse order of removal.

Step 7. Original boot is tucked under the carpet so the easiest way is to simply slip it out and pull it over the handle, opening the Velcro to fit over. You can also remove the whole console with a 10mm socket and ratchet extention, but not neccessary. (two bolts inside console, one in cupholder).

Step 8. Open the Velcro on the new boot and slide over emergency brake handle. Start tucking one side of the wore frame under the carpet then work your way around untill it is all the way under. Close Velcro on top.

Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.

Options & Pricing

Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.

Material

• Regular Leather
• Perforated Leather
• Faux Alcantara
• Carbon Fiber Vinyl

Two-tone: choose a second color in the options above.

Layout

• Default (Like My Factory Boot)
• 4 Panel (Stitching Forms An X) +$9
• Front to Back (Axis Of Car) +$9

Style

• Quadruple Thread +$9

Quadruple stitching color applies to the outer lines of thread.