1997-05 Toyota Hilux Dual Shift Boot - Includes Transfer Case

This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.

What This Is

A custom-sewn leather shift boot for your 1997-05 Toyota Hilux Dual. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.

What's Included

• Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
• Not included: shift knob, trim, frames or hardware. You reuse your factory parts.

Before You Order

• Fits 1997-05 Toyota Hilux Dual.
• It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
• International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.

Installation

Difficulty: Moderate  |  Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame

You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.

▼ Click to Open / Close Step-by-Step Installation Guide (15 Steps)

Step 1. Remove shift knob. (turn counterclockwise).

Step 2. Remove 4x4 knob but taking out screw from the side, will remain attached to the shift boot (SR5 only, non SR5 will just unscrew).

Step 3. Remove 4 screws from the plastic trim around shifters.

Step 4. Pull off plastic trim that has shift boot attached. Carefully as not to break the wire that is attached to the 4x4 shift knob. (SR5 only).

Step 5. Disconnect wire to 4x4 shift knob and remove the knob from the boot by pushing in the 4 tabs inside the boot.

Step 6. Remove old shift boot from plastic trim. (Just unclips from underneath).

Step 7. The old boot has a wire frame sewn into the bottom. If you had purchased the new boots with the optional bracket (for an extra $19), skip this step. If not, you need to transfer the wire from the old boot to the new one. The way to accomplish it is explained here.

Step 8. Place new shift boot into trim by clipping it into place underneath.

Step 9. Seat the 4x4 knob on the boot - feed the wire through the collar of the boot.

Step 10. Attach 4x4 shift knob to new boot by pushing into place until the 4 tabs are completely in. May be very tight.

Step 11. Reconnect the connector.

Step 12. Lower the center console back into place. Make sure the 4x4 shifter goes on top of the transfer case lever properly.

Step 13. Reattach the 4x4 knob permanently by screwing in the lock screw.

Step 14. Reattach the bottom trim with the screws removed earlier.

Step 15. Screw the shift knob back on.

Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.

Options & Pricing

Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.

Material

• Regular Leather
• Perforated Leather
• Faux Alcantara
• Carbon Fiber Vinyl

Two-tone: choose a second color in the options above.

Layout

• Default (Like My Factory Boot)
• 4 Panel (Stitching Forms An X) +$9
• Front to Back (Axis Of Car) +$9

Style

• Quadruple Thread +$9

Quadruple stitching color applies to the outer lines of thread.