1994-99 Toyota Celica Shift Boot

This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.

What This Is

A custom-sewn leather shift boot for your 1994-99 Toyota Celica. It's the leather only: it installs on your factory frame or trim ring. It is not a complete shift boot assembly.

What's Included

• Included: 1 leather shift boot, cut and sewn to order in the material and colors you choose.
• Not included: shift knob, trim, frames or hardware. You reuse your factory parts.

Before You Order

• Fits 1994-99 Toyota Celica.
• It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
• International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.

Installation

Difficulty: Moderate  |  Tools: screwdrivers, basic hand tools, glue or a stapler depending on your frame

You'll remove the shift knob and trim, move the new boot onto your factory frame, and reinstall.

▼ Click to Open / Close Step-by-Step Installation Guide (15 Steps)

Step 1. Remove shift knob by turning it counter-clockwise.

Step 2. Grab shifter surround plastic and gently pull up.

Step 3. Remove shift boot from trim carefully as to not damage plastic retaining pegs. Replace with new shift boot. If not installing any other item, reinstall everything in the reverse order of removal.

Step 4. Remove (2) Phillips screws circled in red.

Step 5. Open arm rest and remove cloth cover.

Step 6. Remove (2) 12mm bolts circled in red.

Step 7. Lean console forward to disconnect connector for ash tray light.

Step 8. Lift rear console up and out. Remove (2) 12mm bolts circled in red. Loosen (1) 12mm bolt circled in green.

Step 9. With a pair of needle nose pliers depress clip.

Step 10. Remove (2) 10mm nuts circled in red.

Step 11. Slide the e-brake up slowly while the cable slides down and out of the groove.

Step 12. Turn e-brake leather cover inside out.

Step 13. Using a brush apply contact adhesive to the e-brake & e-brake leather.

Step 14. Allow to dry to a tacky state (3 – 5 minutes normally but check with the glue you chose for the installation).

Step 15. Ensuring that the stitching is facing the top of the e-brake start “rolling” the e-brake leather cover over the e-brake handle so that the interior (glued portion) of the leather makes contact with the handle. When it is completely installed ensure that you have a straight line with the stitching and apply moderate pressure working your way down towards the base of the handle. If you are not installing the center console cover, reinstall everything in reverse order of removal. ARMREST COVER.

Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.

Options & Pricing

Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.

Material

• Regular Leather
• Perforated Leather
• Nappa Leather +$15
• Genuine Alcantara +$25
• Faux Alcantara
• Carbon Fiber Vinyl

Two-tone: choose a second color in the options above.

Layout

• Default (Like My Factory Boot)
• 4 Panel (Stitching Forms An X) +$9
• Front to Back (Axis Of Car) +$9

Style

• Quadruple Thread +$9

Quadruple stitching color applies to the outer lines of thread.