This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.
What This Is
A custom-sewn leather cover for your existing 1990-99 Toyota MR2 dash. It is a cover for your factory part, not a replacement part.
What's Included
- Included: 1 custom-sewn cover, made to order.
- Not included: factory parts, adhesive, or tools.
Before You Order
- Fits 1990-99 Toyota MR2.
- Substrate parts are NOT INCLUDED, the picture is for illustrative purposes only.
- It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
- International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.
Installation
Difficulty: Moderate | Tools: basic hand tools, contact adhesive for leather
You'll remove the factory part, fit the new cover, and reinstall. Contact us with any questions before you start.
▼ Click to Open / Close Step-by-Step Installation Guide (8 Steps)
Step 1. Wash and degrease dash with a quality grease and wax remover.
Step 2. After drying the dash thoroughly, use a 80 grit sandpaper to prep the surface for a good bite. Wash the dash again to remove residue.
Step 3. Go to your local hardware store and buy a quality can of contact cement and a couple of small brushes. Don't bother with the 3m aerosol cans as your dash trim will lift soon after. Also purchase an x-acto knife.
Step 4. Brush on the contact cement onto the Dash first as the dash will take longer to dry compared to the leather. Make sure you use a generous amount of contact cement. make sure you spread it out evenly.
Step 5. Brush a generous amount of contact cement on the inside of the leather dash kit.
Step 6. Wait until the contact cement is almost dry and not sticky anymore. You will need a pair of extra hands here. Line up the stitch line against the lip of the driver's side gauge cluster while a helper holds the passenger side away from the dash. Once the driver's side is done, move to the middle and line up the stitching over the clock, then above the glove box. Once those are lined up properly, the rest is fairly easy. Once everything is in place, make sure to run your hands all over the dash with some pressure.
Step 7. You will then pull your x-acto knife to cut the hole out for the clock, the defroster vents and the side vents. You will also have to remove the excess leather that is hanging over the dash and you will end up with something that looks like this.
Step 8. Reinstall the dash into the car.
Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.
Options & Pricing
Choose your material, colors, and stitching color in the options above. Add-on prices are added in the cart.
Frequently Asked Questions
Q: Is my personal information kept private? Is it safe to use my credit card?
A: Yes, your personal information is kept private and it is safe to use your credit card.
Q: How much will shipping cost?
A: Unfortunately, the cost of shipping is a real expense. Our goal is to minimize your shipping costs. Shipping is calculated at checkout based on the items in your cart and will be displayed prior to you placing an order. Please note that oversized items may be subject to additional charges, which will be noted on the product page.
Q: How do I track my order?
A: Once your order ships, you will receive a tracking notification via email.
Q: Can someone outside of the United States place an order?
A: Yes, we are happy to provide worldwide service for our customers. Your shipping charges will be calculated during the checkout process. Customs and duty fees are the responsibility of the buyer.